§ 44-404. Lot area per family.

(a)

In R-3 districts each one-family dwelling, together with its accessory buildings, hereafter erected, there shall be provided a lot area of not less than 15,000 square feet when said lot is not served by either a municipal water or a municipal sewerage system; shall provide a lot area of not less than 12,000 square feet per each one-family dwelling when said lot is served either by a municipal water system or a municipal sewerage system; shall provide a lot area of not less than 9,600 square feet for each one-family dwelling when both a municipal water and a municipal sewerage system are available, and said lot shall have a width of not less than 80 feet at the front or rear building line.

(b)

All lots used for two-family dwellings shall provide the same minimum lot area as required in R-2 districts.

(c)

All lots used for multiple-family dwelling units shall provide the same minimum lot area per unit as follows:

Single-family terrace	2,320 square feet
Efficiency unit	2,300 square feet
One-bedroom unit	2,800 square feet
Two-bedroom unit	3,300 square feet
For each additional bedroom, library, recreation, or family room, add	500 square feet

 

(Code 1969, § 5.147; Code 1977, § 28-235; Ord. No. 23-Q, 9-28-1970; Ord. No. 265, § 4, 10-11-1999)